Development Opportunity for
1000 Brannan St, San Francisco, CA


No Expansion Potential

Existing:
137,356 ft2
 
Allowed:
134,368 ft2
 

This property is a Other currently used as a Industrial. Property is on a lot of 33,597 sqft and has a conditioned area of 108,840 sqft.

Zoning District: PDR-1-G

What are the local zoning regulations for 1000 Brannan St ?

PDR-1-G (PRODUCTION, DISTRIBUTION & REPAIR - 1 - GENERAL)

The intention of this District is to retain and encourage existing production, distribution, and repair activities and promote new business formation. Thus, this District prohibits Residential and Office uses, and limits Retail and Institutional uses. Additionally, this District allows for more intensive production, distribution, and repair activities than PDR-1-B and PDR-1-D but less intensive than PDR-2. Generally, all other uses are permitted. In considering any new land use not contemplated in this District, the Zoning Administrator shall take into account the intent of this District as expressed in this Section and in the General Plan.

The intention of this District is to retain and encourage existing production, distribution, and repair activities and promote new business formation. Thus, this District prohibits Residential and Office uses, and limits Retail and Institutional uses.

Permitted Residential Uses: None

Permitted Non-Residential Uses: Drive-up facility, formula retail, open air sales, outdoor activity area, walk-up facility, agricultural uses, automotive repair, automotive sale/rental, automotive service station, automotive wash and electric vehicle charging location.

What is the maximum height for 1000 Brannan St ?

40-X

No portion of a dwelling can exceed a height of 40 feet, except that the permitted height has to be reduced to 35 feet where the average ground elevation at the rear line of the lot is lower by 20 or more feet than at the front line. The height is measured by taking a point at the centerline of the building or, where the building steps in relation to a street that is the basis for height measurement. Separate points need to be taken at the centerline of each building step. The upper point is the highest point on the finished roof in the case of a flat roof, and the average height of the rise in the case of a pitched or stepped roof.

What are the ADU regulations for 1000 Brannan St ?

ADU eligible

Accessory Dwelling Units (ADUs), also called secondary units, in-law units, or cottages, are units added to existing and new residential buildings. Adding an ADU to your property can provide several benefits, such as providing housing for family members, simplifying your lifestyle, and increased financial flexibility.Learn more about building ADU in this article

What neighborhood is 1000 Brannan St located in?

South of Market, San Francisco

“SoMa” refers most specifically to the section closest to the Mission, with the most restaurants and nightlife; “Yerba Buena” is in the middle, and is known for its density of museums and shopping; and "South Beach" is on the side next to the Bay (although there’s no beach to speak of) and is full of high-rises and not too much else. South Beach is quickly becoming its own neighborhood, but for now it falls under the general SoMa umbrella.

This area was once zoned primarily for commercial use and that history is still present in the lofts and apartments fashioned from converted warehouses and office space. On smaller side streets you’ll occasionally find a Victorian or a modern condominium. Brick walk-ups are common, as are high-rises; these tend to be more common the further west you go.

Get a complete Development Opportunity report for your property


Home owners and real estate agents maximize property value and attract more qualified buyers by showing the untapped value with expansion option renderings.

CityStructure - Feasibility Study simplified

CityStructure reveals the untapped value of real estate properties so you can sell them at the maximum value.


Copyright (C) CityStructure Group, Inc.